Behaviour of oat globulins in lactic acid fermentation of oat bran

Oat bran fermentation (OBF) is used to produce non-dairy yogurt-type products. Such products may be designed being rich in probiotic bacteria and/or dietary-fibre. Oat bran is, however, also rich in proteins, especially 12 S globulins. Understanding the behaviour of globulins in OBF would thus offer a basis for further exploitation of proteins in the product design. The behaviour of oat globulins was monitored during a model OBF in order to study changes in protein solubility and possible protein hydrolysis. Proteins were extracted from OBF samples with a buffered and a non-buffered extraction procedure. The extracts were analyzed with SDS-PAGE and a Lowry assay. Combined effect of pH and NaCl-concentration on the solubility of oat globulin isolate was studied. The solubility of oat globulins decreased during OBF; this appeared as their shift from the salt-soluble fraction to the residual protein fraction. The shift in oat globulin solubility was due to the acidifying conditions present in OBF, which lead to the unfolding of globulins and also apparently induced protein aggregation. No major protein hydrolysis was observed during OBF.     

Circular correlation based identification of switching power converter with uncertainty analysis using fuzzy density approach

Switching power converters are extensively used in powering various electronics loads and processes. The proper functioning of those processes may be vital for the every day life of the society. Therefore, the reliable operation of the switched-mode converters is of prime importance and the functioning has to be verified reliably both during the design phase and in the production. It has been shown lately that the main deficiencies in the verification process are related to the dynamics of the converter which can be characterized with a certain set of transfer functions. This paper investigates the frequency response measurement methods by means of which the transfer functions can be identified fast and accurately being economically feasible to apply also in the production phase. Multi-period maximum length pseudo random binary sequence (m.l.b.s.) is used as the excitation signal and the transfer functions are identified from the measurement data with circular cross-correlation method. The measurement uncertainty is computed by means of fuzzy density approach yielding a certain confidence band around the measured nominal response. The proposed methods are verified both by simulations and experimental data from high-frequency switched-mode converters.     

Sulphide-induced stress corrosion cracking and hydrogen absorption of copper in deoxygenated water at 90°C

Stress corrosion cracking (SCC) of oxygen-free phosphorous-alloyed copper was investigated in sulphide- and chloride-containing deoxygenated water at 90°C with sulphide concentrations of 0.001 and 0.00001 M. Several intergranular defects were found in the specimen exposed to the high sulphide environment. Similar defects were not found in the low sulphide environment, where only slight corrosion on grain boundaries and slip lines occurred. Hydrogen content measurements show an increase in hydrogen uptake of the plastically deformed specimens, which is dependent on the sulphide concentration and on plastic deformation of copper. However, the highest hydrogen content was measured in friction stir welds, welded in air without shielding gas, and tested in the high sulphide environment. The embedded oxide particles in the weld metal act as local hydrogen trapping sites and selectively react with the sulphide solution. A relatively thick air-formed oxide film covers the copper canisters when deposited, which transforms into a sulphide film in the repository conditions. Thus, some of the coupon specimens were pre-oxidised. The conversion of the pre-existing Cu₂O film into Cu₂S film occurs quickly and the transformation is almost 100% efficient. The structure and properties of the Cu₂S films, susceptibility of copper to sulphide-induced SCC and hydrogen uptake of copper in reducing, anoxic repository conditions are discussed.     

Hydrogen embrittlement of nodular cast iron

Ferritic nodular cast iron, intended for use as the material for inserts of canisters for long-term geological disposal of spent nuclear fuel, was studied for hydrogen sensitivity. In the canisters, the insert provides the mechanical strength against external loads. Hydrogen was charged from 0.1 N H₂SO₄ solution in free-corrosion tests and under controlled cathodic potential. Hydrogen uptake and trapping were then measured using thermal desorption spectroscopy. The hydrogen desorption rate after hydrogen charging manifests two distinct peaks. Plastic deformation during hydrogen charging increases the hydrogen uptake considerably. Hydrogen reduces the elongation to fracture and time to fracture in slow strain rate testing and constant load testing (CLT), respectively. Especially, the strain rate in CLT is dramatically increased. The appearance of hydrogen-induced cracking in the ferrite phase changes from ductile dimple fracture to brittle cleavage fracture due to hydrogen charging, which initiates from the interphases of the graphite nodules. The results are discussed in terms of the role of hydrogen and the graphite nodules in hydrogen embrittlement of ductile cast iron.     

This is not classified: everyday information seeking and encountering in smart urban spaces

We present a multipronged comparative study of citizens’ self-proclaimed information needs and actual information seeking behavior in smart urban spaces. We first conducted several user studies to identify the types of information services that citizens believed to be useful in urban setting utilizing methods ranging from contextual inquiry with lo-fi prototypes to “card sorting” exercise with a separate set of participants, and finally to implementing selected services. We then made a sizeable constructive intervention into the urban space by deploying in a city center 12 large, interactive public displays called “hotspots” to offer a wide range of previously identified information services. We collected comprehensive qualitative and quantitative data on the usage of the hotspots and their services by the general public during 13 months. Our study reveals discrepancies between a priori and a posteriori information seeking strategies extracted from the self-proclaimed information needs and the actual usage of the hotspots.     

Characterization of porous glass fiber-reinforced composite (FRC) implant structures: porosity and mechanical properties

The aim of this study was to characterize the microstructure and mechanical properties of porous fiber-reinforced composites (FRC). Implants made of the FRC structures are intended for cranial applications. The FRC specimens were prepared by impregnating E-glass fiber sheet with non-resorbable bifunctional bis-phenyl glycidyl dimethacrylate and triethylene glycol dimethacrylate resin matrix. Four groups of porous FRC specimens were prepared with a different amount of resin matrix. Control group contained specimens of fibers, which were bound together with sizing only. Microstructure of the specimens was analyzed using a micro computed tomography (micro-CT) based method. Mechanical properties of the specimens were measured with a tensile test. The amount of resin matrix in the specimens had an effect on the microstructure. Total porosity was 59.5 % (median) in the group with the lowest resin content and 11.2 % (median) in the group with the highest resin content. In control group, total porosity was 94.2 % (median). Correlations with resin content were obtained for all micro-CT based parameters except TbPf. The tensile strength of the composites was 21.3 MPa (median) in the group with the highest resin content and 43.4 MPa (median) in the group with the highest resin content. The tensile strength in control group was 18.9 MPa (median). There were strong correlations between the tensile strength of the specimens and most of the micro-CT based parameters. This experiment suggests that porous FRC structures may have the potential for use in implants for cranial bone reconstructions, provided further relevant in vitro and in vivo tests are performed.     

高速新概念成形——低定量双层箱纸板,变不可能为可能

介绍了一种全新的、已获专利保护的、用单台混合成形单元生产容器用轻量双层箱纸板的成本效益型的概念。新概念将三个独特的部件和技术结合为一体：新型ValFloPro双层流浆箱、VacuBalence真空辅助成形板和ValFormer靴刮刀混合成形器技术。这个具备分层技术的混合成形新概念将纸机运行速度提高到1400m/min,是生产一流质量轻量箱纸板的一种切实可行的替代方案。     

Oxidation of magnesia-supported Pd-clusters leads to the ultimate limit of epitaxy with a catalytic function

Oxide-supported transition-metal clusters and nanoparticles have attracted significant attention owing to their important role as components of model catalysts, sensors, solar cells and magnetic recording devices. For small clusters, functionality and structure are closely interrelated. However, knowledge of the structure of the bare cluster is insufficient as the interaction with the chemical environment might cause drastic structural changes. Here we show by ab initio simulations based on the density functional theory that the reaction with molecular oxygen transforms small, non-crystalline, magnesia-supported Pd-clusters to crystalline Pd(x)O(y) nano-oxide clusters that are in epitaxy with the underlying support. Restructuring of the Pd backbone is controlled by the electrostatic interaction with magnesia leading to a strong reduction of the O2 dissociation barrier. The supported Pd(x)O(y) clusters are likely to serve as Mars-van Krevelen oxygen reservoirs in catalytic oxidation reactions as observed for PdO overlayers and demonstrated here for the oxidation of CO molecules.